Tuesday, June 23, 2020

Fully automatic large-scale fryer

1. Frying line Automatic heating machine for frying machine:

1. The heating tube bracket is fixed on the mesh belt bracket and moves together with the mesh belt bracket.

2. After the mesh belt support is lifted, the heating tube automatically turns off the heating function to avoid causing a safety accident.

Second, the frying line Fully automatic frying machine oil level monitoring:

1. Use up and down limit control, when the oil level in the tank is higher or lower than the set limit, the system will automatically shut down and give an alarm.

2. Refueling limit control, when the oil level is lower than the set limit, the heating system automatically shuts down and alarms to refuel. When accidentally refueling is close to the upper limit, the alarm prompts the refueling personnel, do not refuel.

3. All oil level controls are set by PLC, and different oil levels can be set according to different items produced.

Third, Taizy frying line advantages of automatic frying machine:

1. Perfect safety system: equipped with an automatic fire extinguishing system, when dangerous faults such as over-temperature and sensor failure occur, the equipment will automatically cut off the power and alarm. The manual trigger switch box can be installed on the wall away from the frying line.

2. Automatic slagging system to avoid fire: Equipped with horizontal and vertical auger lifting automatic slagging system at the discharge port, which can effectively avoid the fire caused by slag storage.

3. Develop and improve the tank oil pumping device so that there is no oil sludge under the oil-sifting screen at the bottom of the slag scraper, which reduces the chance of oil becoming a paste.

4. Our frying equipment can use shortening: the main circulation pipeline is used as high and low oil pipelines, and the bottom end can be emptied after working, and almost no oil is stored. The stainless steel heating cable is added above the valve so that the oil can quickly melt when the equipment is used.

5. The front end of the Teflon plate at the entrance can be adjusted up and down by 50mm to prevent the deformation of fried chicken steaks.

6. The tank is bent to increase the stability of the tank and prevent the tank from being deformed during long-term use.

Fourth, Taizy frying line, fully automatic frying electrical cabinet control system advanced:

The electric control cabinet is made of 304 stainless steel and the thickness is 2mm. The cabinet adopts a double-layer structure, and the outer layer adopts a sloping top design. The original electric appliances such as touch screen and PLC in the box are of the "Siemens" brand and are equipped with emergency stop control. When dangerous faults such as over-temperature and sensor fault occur, the device automatically cuts off the power supply and alarms. The main control circuit is as follows:

1. The main drive motor is driven by a frequency converter.

2. The AC contractors are all French "Schneider" appliances, the temperature control instruments are Taiwan "Omron" appliances, and the intermediate relays are Schneider appliances.

3. There is an emergency stop switch, a total leakage protection switch, an over-temperature alarm, a sensor failure automatically cuts off the power and alarms, and oil level upper and lower limits are controlled. (The device itself is not equipped with a transmission main cable other than the device).

No comments:

Post a Comment

Maintenance Tips for Plastic Crusher Blades

In order to ensure that the plastic shredder blades remain efficient and sharp after a long time of use, the following maintenance work need...